Social Media

          

7 May 2018

Citadel Wood - Base

For my Sylvaneth army, I needed some Wyldwoods so I can scoot around the board and provide some bonuses for my treefolk. So... I picked up 3 Citadel woods. These will allow for up to 3 Wyldwoods so should be enough!


As I was getting these ready for my trip to Warhammer World, I descoped painting the trees so this post just covers the painting of the base.

Painting
As usual, the model was primed with Vallejo Black Primer with the rocks picked out with Vallejo Grey Primer. Once the primer had cured, the base was painted with a cheap brown HobbyCraft paint.

I then painted the fallen trees and roots with Baneblade Bown and highlighted with Adminitratum Grey which then had some Nurgling Green mixed in.

The rocks were painted Pallid Wych Flesh. Once this had dried I used the Leopard Spot technique to add colour to the rocks. More details on this can be found in the video below.


The whole base was then washed in a homemade black wash made with a cheap black paint and water. I applied 2 coats of this to get the desired shade on the rocks.



Finally, the base was given a coat of watered down PVA

Flocking and other details
Once the painting was concluded I covered the base (except the rocks) with PVA. This provided the base for the static grass and forest floor flock.

The static grass was applied to a few areas of the base. Then, I applied LukesAPS forest floor scatter all over the base. After this, I added a few bits of clump foliage, some flower tufts and finally some fallen leaf debris. Once I was happy with the coverage of these materials, the base was given multiple coats of watered down PVA and some Isopropyl alcohol to seal and protect the model.

3 May 2018

Sylvaneth Wardroth Beetle


With the unit of Kurnoth Hunters completed, that leaves only Alarielle, her Wardroth Beetle and some Wyldwoods to complete.


With the time of the essence (my army needed to be complete for a weekend trip to Warhammer World on the 27th April) I chose to prioritise Alarielle and Beetle above the Wyldwoods. Obviously, with such huge pieces of plastic, it was important to split the models down into sensible, manageable chunks. This helped with easy of painting but also so I didn't get overwhelmed. With this in mind I decided to tackle the Wardroth Beetle first and so split the model into 5 subassemblies:
  • Head
  • Left front leg
  • Right front leg
  • Front carapace
  • Rear carapace
Whilst this helped, due to the size and shape of each piece, I still found the model very hard to paint! So let'sts go through the steps and colours used:

Step 1 - Priming
As with all my models, I primed with Vallejo Polyurethane Black Primer through the airbrush. I then applied a couple of quick coats of Vallejo Grey Primer as a zenithal highlight.

Step 2 - Base coats and highlights
I painted the base coats and highlights as part of the same process so I cover these by area below.

Beetle Shell
The main body of the beetle was airbrushed with Incubi Darkness. I highlighted specific places with Sotek Green. I then used Naggaroth Night to pick out out some of the areas which I wanted to have a purple tone. These were mainly on the lower facing shell surfaces. To highlight the upper sections of shell I edge highlighted the bits I wanted to pick out with Kabalite Green > Sotek Green > Temple Guard Blue. The lower sections of shell were highlighted with Xereus Purple > Genestealer Purple.

Soft Underside
The soft underside at the rear of the beetle was painted Daemonette Hide (by brush) and airbrush highlighted with Warpfiend Grey > Slaanesh Grey.

Claws
These were painted with Celetra Grey and highlighted with Ulthuan Grey and White Scar. For the larger claws, the highlights were applied with the airbrush, as opposed to the brush for the small claws and mouth horn things!

Gems
The gems hanging from the beetle were based with Thousand Sons Blue and highlighted Temple Guard Blue and Baharroth Blue.

Rope
The rope attached to the hanging gems was based Mechanicus Standard Grey and highlighted Dawnstone and Adminitratum Grey.

Foliage
The bark was painted with Dryad Bark and highlighted with Gorthor Brown and Screaming Skull. The leaves and moss were based Caliban Green and highlighted with Loren Forest and Elysian Green. The green areas were then hit with a glaze of Lamenters Yellow.

Fungus/Mushrooms!
Khorne Red, highlighted with Squig Orange and Kislev Flesh

Step 3 - Gloss Varnish
Quite a quick step this one... I airbrushed a good couple of coats of Vallejo Gloss Varnish over the model. This acts to protect the paintwork underneath but also prepare the model for the next step, shading.

Step 4 - Shading
My original plan was to apply shading to matte the whole model back down, however, I discovered that the beetle looked great with the gloss varnish. So, I applied the shade in a more targeted fashion.

Soft Underside
I applied a mix of Army Painter Dark Tone/Army Painter Shade Mixing Medium 1/4 ratio across the while underside. I then changed the shade ration to more like 1/1 Dark Tone/Mixing Medium and applied this in the deepest recesses.

Claws/Rope
The claws were shaded with a 1/1 mix of  Army Painter Dark Tone/Army Painter Shade Mixing Medium

Foliage
The foliage was shaded 1/1 mix of  Army Painter Strong Tone/Army Painter Shade Mixing Medium

Gold Details
The gold detail was shaded 1/1 mix of  Army Painter Soft Tone/Army Painter Shade Mixing Medium

Final Steps and Conclusion
After the shade had dried, I glued pieces of slate to some of the feet of the beetles in preparation for how it will sit on the base.

In conclusion, I found this model quite a challenge to paint. I didn't go far enough splitting the model down to subassemblies and so found painting some areas very challenging. It's a great model and I'm reasonably happy with how it turned out. If I can follow this up with a good paint job on Alarielle and the base then it should be a good focal point for my army.

Next up, the base!

16 April 2018

Sylvaneth List for Warhammer World Gaming Weekend

During the last weekend of April, I will be spending 3 days battling it out at Warhammer World. I'll be playing some 40k, AoS and some Shadespire.

This trip has been on the cards since last year and has provided the motivation and focus for my work on the Sylvaneth wardrobe I've been building. Aside from a quick demo game at Warhammer Edinburgh, I've never played AoS... and can't wait to get my army on the board.

The formation of the list I've settled on has been led by the models I already collected rather than collecting models to match a list... so it remains to be seen whether it will be competitive or not!

Anyway, here the list... let's hope it does the trick!


Allegiance: Sylvaneth

Leaders
Alarielle the Everqueen (600)
- General
- Deepwood Spell: The Reaping
Branchwraith (80)
- Artefact: Acorn of the Ages
- Deepwood Spell: The Dwellers Below
Branchwraith (80)
- Artefact: Acorn of the Ages
- Deepwood Spell: The Dwellers Below
Branchwych (80)
- Deepwood Spell: Regrowth
Treelord Ancient (300)
- Artefact: Ranu's Lamentiri
- Deepwood Spell: Verdant Blessing

Battleline
10 x Dryads (100)
10 x Dryads (100)
10 x Dryads (100)
5 x Tree-Revenants (80)
- Sylvaneth Battleline

Units
3 x Kurnoth Hunters (220)
- Greatbows
3 x Kurnoth Hunters (220)
- Greatbows

Behemoths
Treelord (240)

Battalions
Forest Folk (110)
Harvestboon Wargrove (200)

Scenery
Sylvaneth Wyldwood - Sylvaneth Allegiance (0)

Total: 2510 / 2500
Allies: 0 / 500
Wounds: 120

9 April 2018

Sylvaneth Kurnoth Hunters (2nd unit)

Being a very lucky chap whose wife is very supportive of my hobby activities, part of my birthday present this year was this unit of Kurnoth Hunters. This was the second unit of Hunters I've painted...  I posted the first set of models here.



Generally, I followed the same steps covered by the post linked above. However, I wanted to learn from the experience of building and painting the first unit so I did a few things differently!

The main difference centred around the use of subassemblies. This time around, I didn't glue the arms, head or shoulder pads together. This allowed much easier access to the dark green 'flesh' areas of the models.

The second change relates to the arrows. This was quite minor but I chose to apply an edge highlight to the yellow 'feather' areas of the arrows. I felt that on the first set of models, the yellow looked a bit flat and this change helped them start out a lot better!

Thirdly, I wanted to prevent the wash from neutralising the blue used for the runes and facial details. I first tried this on the unit of Dryads I recently completed. It worked a treat!

I really like how this unit turned out. I feel as if the small changes I'm making to my process - removing the wash from the blue areas, spot highlighting certain details - will really help address the concern I have around the models looking too dull/flat.

2 April 2018

White Dwarf Readers' Model of the Week!!

After recently completing a Lord-Ordinator model, and being rather happy with how he turned out, I figured I'd submit a photo to the White Dwarf FB page to see if they would feature it. I didn't really hold out much hope but getting a model featured, in any fashion, by GW is a hobby goal so I thought this model would be my best chance.

A few days later I noticed this article (link here)!!

Well chuffed 👍😀